![](https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEi03YteHAkT7CSg5X_-ArROkGu3011HkW-pAl6h0U5aFad8ncF2QQIhKaqkbrcHrhVVK2I_ZgeCmzbjhHldRzgtW4CDG6i8WEy2pLMZiV9qUBw7KdKgZIpiAeL-NzbSfMBDEj563xSfgnTN/s400/0106101542-00.jpg)
Shortening forks isn't as easy sometimes, especially when you're dealing with a bmw and its freaky-deaky internals. I cut 2" off and re-bored and threaded the ID which only took me about an hour and 1/2 but compared to my forks which I just made spacers underneath the dampeners- took only 5 minutes. Here's a nice close-up inside the lathe.
No comments:
Post a Comment