Star Wars...

... Episode Tetas. Blotto Mike D got me googling for these.

Tatoozday

You gotta hand it to the Suicide Girls

Munster Boner 2

Irene may be headed towards you....

Be safe out there friends....

This one's for Matt........

TGIF

The guys at Biltwell are opening their doors for Happy Hour this Friday.

Hope it gets there in one piece.....

Thanks Kent for the support all the way from scrappy old England. Your pull start will get there soon hopefully.....

Plenty of Fish in the Sea

Beer Booters Chopper Show Winner

Hamburger Run

Friday, didn't have shit to do, so I took the Ortega Hwy from Lake Smellsinore to SJC, then took the PCH to San Clemente, stopping at The Riders Club Cafe (Surfer, not Biker) for the best burger. After riding around for a bit, I stopped by the gas station to fill up and found out that the brand new and fully charged battery was completely drained. Fuck, the charging system is probably shot. After hooking up to the charger for few minutes, the bike was good to go, so I rode over the Ortega back to hot Lake Assinore. Good way to start the weekend.

Foot Pegs for Temecula Terry from Alhambra

  I made these for a buddy of mine who hooks me up consistently with some great beers. Wrenching, drinking, sharing moto tales, tall and short, is how the Beer Booters got started. And the buzz continues with a nice lil shindig and "chopper show" at my place this Saturday. So if you're in town stop by and say hello and pick up a beer and toast to good times.

Remember Jungle Jim ???And Pam :-)>.....

Helmetcam Tatoozday

Star Hub Rotor Carrier

  I've seen this sold as a kit but with the billet look and modern looking caliper, I say they look like ass and knowing we can do better I set off to do just that, and with modern components. A small Brembo 240mm star-shaped rotor and matching caliper keep with the star theme and are not too overwhelming, neither is the 6" diameter of aluminum billet that when machined blends in nicely with the hub.
  Did you know who uses special 3/8-20 bolts on their drums? The factory that's who, fuck, so off to get a special pitch tap. Here are some sneak pics. Axle is done, and I'm still waiting for the rotor bolts and I still have to make the caliper bracket and axle spacers.

Tattoozday

Munster Boner

Found this 1100 while loitering around the Ducati forum. Stripping an already stripped bike enhances the sex appeal.

Lossa Engineering

So I jump on my bike  to deliver a Bubba air cleaner in Long Beach, and I remember the open house Lossa is having, so I stop by for a bit to check out their shop and snap some pics. Pretty nice stuff coming out of there. Funny coincidence, cuz on my way home I stop by my friend Chihuahua Frank's place and he tells me he's picking up a KZ750 and wants me to "cafe" it up. I'm thinking 16/16 DID spoke wheel combo with short tracker bars, wide front end, and nice rear loop. We'll see where this one takes me. The journey there is worth the trip...or something like that.

Heavy Breathing

The Sporty was in need of some heavy breathing, so "Bubba" came to the rescue. Bubba+Bates Pegs+Pull-Starter= 10+hp! Maybe not that much...

Moto Art

Made these for my bud Lou who's building an XS400 for a customer of his. These will get welded to the stator and points covers. 

Shovel it up.....

If you know my buddy  Ryan from Classic Cycles you know what kind of quality British bikes this guy put out, as well as the intensive care of dying motors they perform on a day to day basis. So what? He's got a shovel? Yup, sneak peek here.....

Tattoozday

Saturday, Swap Meet, Burbank, Be There

4201 W. Magnolia Blvd. Burbank CA @ the old fruit stand....come see my melons!!!!!!!!!!!

Lucky Tim...

...has joined the STILL KICKING  blog team.   This crazy fucker rides the piss out of his sportster, got hit by a semi, kept the rubber side down, and lived to tell the tale. If you see him, buy him a beer.

*****PHOTO TAKEN WITH AGE PROGRESSION TECHNOLOGY*****

DUC

Ducati 900SS. I need to score one of these one day...

Tattoozday

Show Support...

...to those who support your scene and keep the tradition alive. Proud to send a care package to our Greasebag friends on the East coast. If you're close by or not, ride there. You'll be sure to have a great time.

Don't invite this guy to your party

Get a Bearing...

  I pressed out the steering head bearing races on two Hondas I'm working on. One, a budget build due to a tweaked frame from 3 crashes and  fuckin Lucifer is still alive... and the other a racier build for myself and soon for sale. Or maybe I'll sell the Kawi, who knows.

  Since I'll be using a Yamaha R1 front end, plans include a new stem to fit 750 neck and bearings, derake the bitch and move it forward and down 1-1/2". I got this bike with the backbone hacked off, so it gives me a fresh start as to how I want to redo and reinforce the existing frame. I'm thinking Norton featherbed meets Multistrada. I've been collecting bits and pieces this last year, and the wheels I found fit the bill and will work with the R1 front rotors after some tweaking. Front is a 19" 5-spoke mag from a 80's Virago and rear is an 18" 5-spoke from a KZ550. Before all this can happen, I will start making an adjustable frame jig. Wish me luck!!!

So hot out I thought I'd post something cool...

Fun with the kids

Tomorrow.........

Changes......

Tattoozday

Monday's Suck

Superior Derby Air Cleaner

Brand spankin NOS, cut and fitted for use as an air cleaner on Craze's builder invite Pan at BF3.  Period correctness can take a back seat to neato.

Attn: Internet Chopper Heroes, Aug 20th

Hot As Balls....

Slideshow: Born Free Three