Still Kicking

I can't stop staring at her chest

2012-02-14T11:16:00.000-08:00

Don't Miss the 4th HOEDOWN....

2012-02-12T17:16:00.000-08:00

This has always been a great event with a nice blend of custom cars and bikes and a good bunch of vendors who support the cause.

Tomorrow is for Lovers.........

2012-02-09T19:07:00.000-08:00

Proper Use of GoPro

2012-02-08T20:03:00.000-08:00

Not Moto related, but definitely worth checking out. I can't stop watching it.

Back in the U.S.A.

2012-02-08T16:48:00.000-08:00

After two weeks of traveling around Europe, I'm back in the U.S.A. It's great to be riding in the sun once again.

Bates Super Kicker

2012-02-06T13:27:00.000-08:00

Here's a kicker that I designed and machined to match the Bates Super pegs.
A total of 9 pieces come together giving you a heavy duty kicker that will last. And
it spins of course.

Supermoto-ing

2012-02-03T11:51:00.001-08:00

Spotted this beauty today in Milan. It's 15 degrees and snowing here and there are scooters and motos everywhere. I'm not missing Cali but i sure do miss being on two wheels.

Feel like some Sushi...........

2012-02-01T13:09:00.001-08:00

Everything Two Wheels

2012-01-30T12:55:00.000-08:00

Walk your dog...........

Amsterdam Breakfast

2012-01-27T06:30:00.001-08:00

Touched down in Amsterdam. Time is 0940 and I start my Europe tour with a proper local breakfast.

Buy it, Ride it, Love it.......

2012-01-25T13:45:00.000-08:00

My buddy Temecula Terry from Alhambra is selling his beloved Thruxton, so cash out that sorry 401K you've been losing money on for the last 5 years and put a smile back on your face. I rewired this bike myself and must say it is the cleanest Thruxies I've ever seen. Handmade gas tank, Bultaco type fairing, racing suspension, custom mods all over the place make this baby a badass canyon carver and overall head turner. Contact this crazy beer-chugging, knife-throwing, shit-talking mother fucker at BEERBOOTERS@GMAIL.COM

BIG......

2012-01-25T13:30:00.000-08:00

I just spent my first (of many more, I believe) 15 hour shift working on this bad boy at my new job. You're looking at a vertical lathe 2 stories high with a 13 ton impeller chucked up ready to be machined. Fun, fun....

Long Beach Swapppp....

2012-01-22T17:05:00.000-08:00

Picked up some neat lil bits & pieces for a top-secret project and snapped some pics of some bikes in the corral. The Raiders didn't make the playoffs but did make it to the swap.

On the Ground

2012-01-21T00:52:00.000-08:00

Finally off of the lift. Just in time as my HF lift decided to take a shit and leak everywhere... Hanging wires will be cleaned up tomorrow.

This Thing Is Tough...

2012-01-19T10:23:00.000-08:00

Goldie

2012-01-17T19:21:00.001-08:00

Progress

2012-01-12T19:53:00.000-08:00

1200 kit is here!

Fork boots, highlighted heads, and improved front brake caliper. Not much done today.

Love on two wheels

2012-01-12T17:24:00.000-08:00

Progress

2012-01-10T11:46:00.001-08:00

The front end got a major upgrade by my friend Eddie at MBR (Munoz Brothers Racing) with Race Tech springs and emulators. Eddie works part time for Race Tech of Corona and runs MBR out of his garage, so if you want killer deal on suspension work from an honest guy, drop me a message and I'll provide you with his point of contact. Can't wait to try these babies out!

On top of the fork upgrade, the front now sports Speed Merchant's fork adjusters and a SS brake line guide made by BCM.

I should receive all the parts needed to complete the front end tomorrow. Can't wait!

Pawn Stars

2012-01-10T09:17:00.000-08:00

Our friends from Temecula is taking over the History Channel.

Sunday Cleaning

2012-01-08T16:40:00.001-08:00

After two days of stripping the powder coat, cutting, grinding, filing, sanding, and scotch-briting, the legs are free of all casting marks and sharp edges. The tabs are here to stay since I run a front brake and a fork brace. The top tree also got some attention and is now missing the headlight bucket tabs. Tedious and time consuming but well worth it in the end.

I should be picking up some parts from the powder coater tomorrow, so the Sporty should be put together by Friday. Until then, I will be giving the same treatment to other parts that needs some loving, including these riser bottoms to match this bad-ass Biltwell top clamp.

Late Christmas

2012-01-07T15:16:00.001-08:00

Just got these today for the makeover. Thanks, guys!

Making Changes for the New Year

2012-01-03T11:14:00.001-08:00

Tore the bike down to make some major changes. First, everything will be re-powder coated including the wheels. Then the forks and shocks will be rebuilt, and lastly the 1200 conversion.

And the #1 product of 2011 is.................

2011-12-31T13:34:00.000-08:00

The Witchfinder by no other than Brandon Caquillo of Mullins Chain Drive.

#2: Top 10

2011-12-28T12:45:00.000-08:00

Jay from Special '79 is one of my favorite fabricators because he not only makes rad shit, he shows you how he did it with his detailed pics and videos on his very own Youtube channel. Everybody makes bars these days, but Jay just makes them better with original style and excellent craftsmanship.

***Support hard-working Americans who get their hands dirty for YOU........Amen ***

#3: Top 10

2011-12-23T12:00:00.000-08:00

Boots are a very important part of motorcycling and quality is key as is where they are made. I bought these Justin Jmax boots for myself for Christmas from a little online store that not only offers free shipping but will pay for shipping back should you get the wrong size or don't like them for whatever reason and ship the right ones back to you. Ya Heard Right!!! They are www.americanmadeworkboots.com and from the name, it sounds like they only sell American-made boots. Trip out...I did...

#4: Top 10

2011-12-23T04:39:00.000-08:00

PANGEASPEED: Everything Andy makes is a work of art. His talent is way beyond his years and I am always blown away every time I see one of his bikes. One of my favorite items is his cast points cover. It takes me from the bronze age to the age of CNC lasers in a blink of an eye. Check it out...

#5: Top 10

2011-12-22T22:57:00.000-08:00

Simple is always better and Jesse Basset over at Gasbox shows this with a totally rad and simple rear fender bracket made from cast steel in Ohio.

#6: Top 10

2011-12-22T22:45:00.000-08:00

SPEED MERCHANT'S Preload Fork Adjusters are just what the doctor ordered for your 39mm Front End.

I dream of Baja

2011-12-22T11:45:00.001-08:00

Just got home from a windy ride to find this at my door step. Thanks for the fast shipping, Lowbrow!

#7: Top 10

2011-12-20T12:00:00.000-08:00

Spitfire Motorcycles has been quality making parts for a long time including these beauties. Check them out HERE and as with all their parts they are made here in the USA.

Tatoozday

2011-12-20T06:11:00.000-08:00

#8: Top 10

2011-12-20T06:06:00.000-08:00

Need I say more!!!! The P-Nut tank from Lowbrow Customs...badass...

SIX-Over ..Kick me and I'll kick you back...

2011-12-19T22:59:00.000-08:00

6 Over - Kick Start from Wild Honey Productions on Vimeo.

Three Custom One-Offs

2011-12-17T12:24:00.000-08:00

First off, we have here an original Superior AC cover with chrome next to perfect. I matched it up to one of my cast backing plates and drilled it for a Super E. It nice and slim perfect for that skinny California chop. Using a 5" K&N it provides more room for the air to move in while still getting protection from the elements. Comes with stainless hardware and James gasket. Priced to sell at $150. Email HERE for info.

2011-12-17T12:12:00.000-08:00

Here's the Speed Demon based off a Bubba style and drilled for a CV, and includes an inverted cone to get air sucked in with ferocious velocity. A 5" K&N x 1-3/4 tall filter is used as in all my AC's. Price is $180 + 13 ship.
I have genuine Buell support brackets available for $20 if purchased with AC.

2011-12-17T12:03:00.000-08:00

This is a what I call a Tracker style AC w/ CV pattern and a K&N 6"x4" oval filter mounted at a 45 degree angle. A custom-made aluminum backing plate is attached to internal spacers and stainless hardware. Buell support bracket, mounting hardware and gasket is included. Price is $120 + 13 ship

Moto Santa

2011-12-15T12:22:00.001-08:00

I just got an unexpected Christmas package from the crafty guys of Biltwell. Thanks, Bill, McGoo, and Mike & Merry Christmas!

Top 10 of 2011: #9

2011-12-15T12:00:00.000-08:00

With the massive appeal of vintage chopper goods came high prices. Lost, for a second, was the inspiration needed to continue the advancement of the cause, if you will, until Craze at Eternal Combustion lifted the needle off the overplayed and skipping record that was period-correctness and said "Look what has hatched unto you."
Now these too may be in high demand just as their mother of yesteryear...THE WARBIRD JUNIOR...

Don't Let This Happen To You

2011-12-15T04:11:00.000-08:00

Please support companies that not only support your scene but truly embody the American spirit of innovation and determination in order to bring you what your moto needs. Or you will die a horrible death like this guy did...

true story.

Are YOU Man or Girl Enough

2011-12-14T16:01:00.000-08:00

Photos taken inside the Wall of Death at the Ramalia Fair in India. These ladies have what it takes. Take note all you bad asses............

Early Xmas present/ Belated Tatoozday

2011-12-14T15:55:00.000-08:00

Top 10 of 2011

2011-12-05T08:23:00.000-08:00

I will be posting some of my favorite parts that have come out this year to make your chop go faster, harder, straighter, stronger............ I will start with the Biltwell exhaust flanges.....you choose your type and you're off to a great start to making custom pipes that you only dreamed of as a child. Reasonably priced and the men in the sparkly helmets stand proudly behind all their products. ****Check em out HERE.****

Yorba Linda Car Show

2011-12-04T15:24:00.001-08:00

As I pulled into YB, I saw a sign for a car show so I decided to check it out. To my surprise, this was the biggest and coolest car show I've been to so far. The best part about the show, it was free! I love it when I stumble on to shit like this when I have time to kill. Only downside of the show was the lack of motos, except for the typical HD's. But being OC, I knew there would be at least one Duc 1198... I was right (thumbs up).

Cycle Swap Meet: Sunday

2011-12-02T13:33:00.000-08:00

Come get your Xmas shopping all in one place. You got schwinns for the kids, pink leather nipple tassels for your sugar-momma, Dice t-shirts for good friends, and pick one of three one-off Air Cleaners from Still Kicking. I don't have pics yet but I can describe them to those not going to Long Beach.

1.) 6-1/2x4" Oval K&N chrome-faced filter rocked at a 45 deg. angle for extra leg clearance and only 1-3/4" in height. Outfitted w/ an aluminum backing plate drilled for a cv carb and includes a Buell CV support bracket. Perfect for you street tracker, modder sportster.

2.) Next up, a traditional genuine Superior (flying goose) air cleaner cover 6" diaameter, chrome in excellent shape, matched up to one of my backing plates and 5" K&N and stainless hardware. Drilled for a Super E. Perfect for that non-period correct Shovelhead winter project.

3.) Lastly, a BUBBA custom performance version with an inverted cone built-in and ready to suck air like Debby does Dallas. Drilled for a CV carb and also includes a Buell bracket. Email for more details right.........
***********HERE**********

The Owl is Back...

2011-11-29T07:16:00.000-08:00

The Skinny Brit

2011-11-28T10:29:00.000-08:00

Our buddy, Temecula Terry's Thruxton is featured on Chop Cult, so go check out his moto HERE to brighten up your Monday morning.

You can check out the kooky shit he puts on his blog HERE.

Have a Killer Thanksgiving

2011-11-23T12:19:00.000-08:00

Logo Revamped...

2011-11-22T08:31:00.000-08:00

My friend and graphic designer extraordinaire ALAN STEDMAN helped me out with my logo. Check out his website HERE. New banner is on the way as well as more stickers (they make great eye patches as well) so if you want something sticky, let me know and I'll send some OWLS your way.

Four 4 Tuesday....

2011-11-22T08:17:00.000-08:00

Classic Cycles Grand Reopening

2011-11-21T07:48:00.000-08:00

If you don't know, then go!!!!

Stray Chop Strut

2011-11-17T10:35:00.000-08:00

If you have ever really looked at how ugly the factory put together the shock bungs to the stamped frame to the fender struts, you would lop those off too. I shaped them to reveal the bungs to look somewhat molded into the now rear egg-shaped section. Next will be a 6" fender mounted from the inside shock mounts, seat pan to fit and a small sissy bar for essential gear to strap to. The plan is to draw the eye back to the center of the wheel, making the rear end look like it was intended to be that way. Make sense?

Fat & Juicy

2011-11-15T08:04:00.000-08:00

For Sale (PRICE DROP)

2011-11-13T13:06:00.001-08:00

Never thought I'd sell my trusty Sporty, but it needs a new home. Check it out here:
-TIM

*****EDIT: Here's a list of reasons to buy this moto******
Custom stainless 2 into 1 w/ reverse cone, SM Derby cover
DeepDish AC, Benchmark Breather bolts, Modified Buell Bracket, Power Commander
Tokico Radial 4-piston Front Caliper w/ custom adapter, Modified Gsxr clutch lever and MC
Chain conversion, Works shocks, Front St fender, Duane Ballard seat, Biltwell tracker bars & points cover
All switches removed from bars, Pull start, Hayabusa battery, Hella hdlt, one-off glass jeweled tail light
48 2.1gal tank powdercoated and pinned, fender too. And more.......
-Wompy

Good Day

2011-11-11T12:56:00.001-08:00

Free meals and perfect riding weather. Being a Veteran on Veterans Day is pretty cool. Thanks to all those who are serving and have served.

A man just walked by me and said, "Nice Knucklehead." HA!

Tomorrow Don't Mix...

2011-11-11T09:20:00.000-08:00

Take some Time in Your Busy Day....

2011-11-11T08:29:00.000-08:00

...and honor those who served and are still serving. I wish I could be with my brother right now who is stationed in Germany and at this moment is visiting the beaches of Normandy. Here's a pic of Sgt. Ed Amor, Marine Attack Squadron 513, stationed in Afghanistan who painted this mural. Harriers have always been my favorite fighter jet ever since my pops took us to El Toro Airshow back in the day.

Morning Coffee

2011-11-08T11:12:00.001-08:00

New Kid on the Block

2011-11-07T22:22:00.000-08:00

1199 Panigale. This new steed exceeds the current Ducati line-up, by packing 195 horses under the fairing. That's a lot of damn horses for a 164kg Moto.

Ocotillo Wells Chill Out

2011-11-07T12:46:00.000-08:00

Although slab got busted, we busted through. Although it rained, it wasn't a rainout. Although it was cold, hearts stayed warm and content enjoying the crackling fire at a new locale. About 500 good dudes showed up to do what we do best: ride, camp and share stories. The web-savvy sherrifs showed up as well looking for outlaws with bats & clubs ready to pummel each other in an infamous satanic ritual known as the coctagon. Riot gear in place and backups waiting with teargas and dogs, they met a bunch of regular guys just camping & having some beers and happen to enjoy riding customized motorcycles. Who woulda thunk it, ayy?? Even a handsome Canadian was there thawing out. Slab City may not have come to pass but the spirit of what it's all about came through like the sun on Saturday morning.

Ocotillo Wells Riot

2011-11-06T15:55:00.002-08:00

I rode out solo on Saturday to check out the new location for SCR3. The sky was clear and the air was crisp, making it perfect for throttle twisties. After shootin' the shit for few hours, I had to return home for some family business but made it back to camp by 9pm in my auto. The entire night is a blur and I woke up this morning with a huge bump on my left shin. On my way home, my car decided to take a shit and after waiting two hours for the tow truck, I was on my way to good ol' Temecula. Big thanks to Biltwell and the sponsors for putting on another great event and the CC whiners for not showing up!

Sorry, this is the only picture I took, but she sure is pretty!

HoneyPot Tail Lights

2011-11-03T13:52:00.000-07:00

Pedro gave me this vintage glass lens to make a tail light with it. So I came up with this design inspired by my dad's old Pontiac w/ some added grooves.

Don't let the man bring you down....

2011-11-03T07:42:00.000-07:00

... the Wuss Ride is still on and should lead to new adventures where the man won't hassle us.

Change of plans

2011-11-02T23:06:00.000-07:00

Still Alive & Screamin'

2011-11-02T00:15:00.000-07:00

Rob kills it again by showing that Buell is NOT dead with his new creation.

Ferris Bueller from rouser on Vimeo.

Desert Oasis in Boots

2011-11-01T08:32:00.000-07:00

Could be just a mirage because all we tend to see are the train wrecks of Lobster Girl and the Cat Lady. This year's super star will be sure to win some hearts I hope..See you at the Slab.

Halloween cautions

2011-10-31T09:40:00.000-07:00

Avoid the guy in the DICK costume

Watch what you eat...

You may not be too old for Halloween but your lungs may be.

Watch out for Luke. He will kill you...

Great Swap Meet Find

2011-10-30T20:26:00.001-07:00

Exhaust, done

2011-10-29T15:49:00.001-07:00

Paired with the honeycomb.

Get Your Bolt-on

2011-10-27T21:15:00.000-07:00

I needed to make a quick stainless 10mm pin so I chucked up a bolt, cut a groove and domed the head. Done.

Weld-In Clutch Perch

2011-10-27T07:16:00.000-07:00

Here's a lil diddy I made for Eli at Cheapskate Cycles. 3-piece design comes together nicely giving a clean no nonsense control. He got 2 sets as he is running a front brake drum. Lucky for him, I have a grip of new chrome dogbone levers hanging around.

Haunted Tuesday

2011-10-25T07:09:00.000-07:00

Get in the garage and DO IT...

2011-10-24T14:58:00.000-07:00

While at the VVMC Rallly, Lucifer spied with his little camera eye this moto that happens to belong to OC Brent. Starting with a donor sportster & a rigid frame he made himself a cool little dream machine...with some quality parts made in the USA by Still Kicking of course.......rear caliper bracket, pull start and a Bubba A/C. Ride the piss out of her, man...

MotoGP crash

2011-10-23T14:12:00.000-07:00

Marco Simoncelli died today during the Malaysian GP. R.I.P. Be safe out there!

Guzzi...

2011-10-22T02:03:00.000-07:00

While surfing the net, I found this pretty Italian. Hard-tailing a Guzzi is a SIN in my book but this one is definitely done right, and the 90 degree V-Twin (my favorite 2wheel motor) looks perfect nestled in this rigid frame.

Speaking of Italian, while Ducati is consistently building slick machines, Moto Guzzi has been putting out barf-tastic machines like this for years and calling it a "Cafe Classic." WTF?!

Dream it...Build it...Ride it...Repeat...

2011-10-22T00:23:00.000-07:00

We did a chain conversion on Lucky Tim's sportsta and I decided I didn't like his sprocket cover anymore so I got inspired while eating a wholesome breakfast. But that's not all folks. A nifty exhaust hanger will weld in right on to the two bungs on the back. You'll see em later.

Open Driveshaft Mod for Model A

2011-10-21T09:18:00.000-07:00

Here's a lil mod I did for Clyde that wasn't too happy with a single key used to lock his open driveshaft. I turned a shouldered bung, pressed into the yoke and drilled and reamed for four dowel pins placed half into the shaft and half in the yoke. That oughta hold it from coming apart.

Snapshots......

2011-10-19T07:30:00.000-07:00

I took this shot outside Garage Co last summer as the sun was setting. I thought I'd share......

Check out the OWL in the valley

2011-10-18T16:20:00.000-07:00

Looking Good

2011-10-17T13:14:00.000-07:00

I wanna say thanks to Pat for sending me theses pics. Real two wheel deal right here, not just shpeel...
What a weekend !!! Stayed in the shop Friday and Saturday working on a customer's XS650. Rewired and fab work : brake switch/ exhaust hanger tab, trick fender mounts, reworked a false oilbag/ electric box and new mounts, axle adjuster pads, forward control rework, and more.......all work and no play.....I'm due for an escape......to the massage parlor.......

Good Stuff......

2011-10-12T08:15:00.000-07:00

...coming soon to the store are my Simpleton Shorty clutch controls for evo type clutch cables in polished aluminum. And of course my Sporty Grab Bar tail section which you can add a sissy bar or p-pad to and unbolt when not needed.
Also for those in need of a much cleaner brake MC than stock, I have a line on some Brembo units with shorty levers available in 11-16mm bore sizes and can be bored out for 1" bars. My new clutch levers will match this Brembo setup nicely. Email me HERE for more info.
Pictured is the Simpleton Clutch in chrome with later stock style lever (also available) which matches stock brake lever. All include a dome-headed stainless pin I made for evo clutch cables.

Late Night Mock-Up

2011-10-11T22:04:00.000-07:00

Just got home from a shitty long day to find the bend I ordered last week at my doorstep. After cleaning up the bend and cone with some scrotch-brite pad I slipped it in the collector. The cone with the 18 degree bend made the new exhaust setup about 4-5" longer than the original setup and I think it fits the bike well. Exhaust should be done next week, complete with spring retainers, solid rear mount, and a little bit of welding.

Sexy Italian

2011-10-11T20:57:00.001-07:00

Streetfightin' Duc: My idea of a perfect bike (minus the funky exhaust setup, mis-matched wheels & reflectors). If u have the $ get it, and let me borrow it. One day... One day...

Two for Tuesday

2011-10-11T07:09:00.000-07:00

Smooth flow~~

2011-10-10T15:25:00.000-07:00

With a new 2.2 tank, the seat was sitting way too high on top of the stock tank/seat mount. To fix this ugliness, the stock tank/seat mount was cut out of the frame and a new Biltwell seat hinge bung was welded on to bring the seat down. To mount the tank, a specialized bung was slipped in the frame, making it possible to swap the 2.2 tank for a 3.3 stock tank for long trips.

Now there's a nice smooth transition from the tank to the seat.

Viva Douche Vegas

2011-10-09T03:59:00.000-07:00

Brembo meet Acme, Acme meet Brembo

2011-10-08T21:30:00.000-07:00

I previously posted some pics of the rotor carrier I turned and mated to a star hub. It wasn't easy but now looking at the final product (minus polish) I think it was well worth it. I made a custom axle, the "wishbone" caliper bracket and all needed spacers and tie rod. This is going on a my bud Pedro's wishbone frame shovel. The springer is Acme and I must say they kick ass with their quality and design. I can't wait to see his bike finished up.

Upgrading

2011-10-05T22:16:00.001-07:00

Illness from Cone Engineering, stay tuned...

Brembo Caliper Bracket for Acme Springer

2011-10-05T07:40:00.000-07:00

What were you doing last night?

She's got the look......

2011-10-04T07:08:00.000-07:00

Converted

2011-10-02T10:36:00.000-07:00

Busy day yesterday

-Went to Wompy's house with Johnny to convert my XL from belt to chain
-Grabbed NYPD Pizza
-Tool fabbed to stop front pulley from spinning
-Finish conversion
-Swap out Air Cleaners
-Came home
-Johnny and I went back to pick up Wompy
-Ate Japanese in Costa Mesa
-Street Chopper release party
-In-N-Out
-Home

Next up, new seat/position, and 15" shocks. All in all, chain looks tough!

Man Doggles

2011-09-29T14:13:00.000-07:00

I stopped by Biltwell HQ this afternoon and left with their new anti-fog goggle. These are super comfortable/flexible and comes in black, gray, and white. You can find these here, so get 'em for the road, dirt, or the snow. Thanks Mike!

SpOrTsTeR Riders: Please respond

2011-09-29T13:09:00.000-07:00

   After a couple of fender and strut chops I did for friends, they were left looking neutered cuz something was just missing back there. I have been asked to chop it but leave enough room for the OL, make a sissy bar but "I want to be able to take it off easily." So I came up with these grab bar tail loops (still in prototyping stage). I would like to get some input on these to see what sporty guys think of their rear ends.
   * What I'm thinking is they'll be available p-coated or raw for those who want to weld in a sissy bar, school-boy book-rack, p-pad tab, or tail light.
   * They will mount in place of the 1/4" spacer in between frame and shock and lock into groove in front providing you drill a 5/16 hole.
   * They will include a tab welded on inside of loop to hold fender or tail light.
   * For earlier models I will change the ears a bit.
   * Will accommodate a Biltwell Banana seat (shown with struts cut off below)

Watcha think?? All comments welcome...........

My baby girl turns 19......

2011-09-29T10:32:00.000-07:00

It's nice to know you've done something great in your life; not to brag, but I am super proud of how my daughter is growing up. Now to get her out of the house so I can make her room into an office!!! Hahaha........

Company/Product Review for...

2011-09-28T08:41:00.000-07:00

I met the guys of SM at the last Hippy Killer Hoedown and was immediately drawn to their racey, performance oozing Triumphs and Sportsters. Being a fairly new company in the industry they didn't have many products to offer, but the quality and style of their parts were top notch.

I purchased this sexy finned derby cover, cast out from A 365 aircraft quality aluminum. These come pretty and polished, but I gave it the scotch-brite treatment and as you can see, it is a clean looking product that is pure quality. Support these guys for they're here to stay, and check them out here!

Ah Shit, is it Tuesday already?

2011-09-27T07:06:00.000-07:00

Cut the Swiss Cheese.......

2011-09-26T07:12:00.000-07:00

Here are some pics sent to me by Ricardo Mueller from the land of fine watches, chocolate, and choppers, Switzerland. I was curious how a deep dish would look black and to my delight, I delight in what I see. He also got some slapstick pegs to help keep his knees in that fresh mountain breeze. Thanks for sharing Ric...the bike came out super cool and I especially dig that tank paint...FRESH....

Deep Dish Air Cleaner or Pizza : YOUR CHOICE

2011-09-23T03:25:00.000-07:00

Getting some things ready for the LB swapmeet this Sunday. Are you ready, freddy????

Parachute Pull Start

2011-09-22T07:47:00.000-07:00

Normally you pull the rip cord when stopping that beast, but in this case we wanted to get it going!! So here's the thing...you know the brass knuckle pull starts, right but sometimes with high and tight pipes there's no room for it or even to get your hand in there to push the solenoid button. On the left side of the bike now, this bracket pulls triple duty : Pull start, push-button on/off 20amp switch, and a hold-down for the vent hose and filter. It took a couple tries to get out all the kinks but I know Mikey is stoked now how it all turned out, plus he's a big nipple guy as well as a cougar hunter so I took that into consideration when designing it.

Wheel For Sale

2011-09-21T07:29:00.000-07:00

Someone please buy this fuckin thing so I can get it out of my life. It's a NEW 21x 3.25" 60 stainless spoke single flange wide glide front wheel 3/4 axle with a NEW Metzeler 120/70/21 Marathon xxl, mounted and balanced.

Asking $350. Use it for a rear wheel with a sprotor if you want, or burn it at Slab City I don't care, just take it.