Thursday, June 30, 2011
Bates Super Pegs
More cushion for the pushin so get yours today. They are 3-1/2 " short and ready to bolt up to your HD mounts. Only $85 shipped to your door. Email me for more info.... HERE......paypal welcome...
Wednesday, June 29, 2011
Puppies and Motorcycles
My bitch had pups and this one seems to like hanging around the garage, isn't scared of my moto and has grease stains on his paws. Now if only I can teach him how to rebuild my carbs....
Tuesday, June 28, 2011
Thursday, June 23, 2011
Can you hear the thunder??
Big thanks to Russel from Down Under for supporting the cause of not leaving your bike stock. Here's a closeup of his EFI Sporty with a polished BUBBA. A clean setup with an aftermarket backing plate and breathers from Benchmark of course.
Now when arriving at Born Free 3, look for me and my buddy Craze from Eternal Combustion. We'll be the cats with beers to share and stories to tell about the 3 bikes we're bringing in. So stop by and introduce yourself and enjoy this magical day although the wizards and dragons won't be there unless under a couple coats of aging clear.
Now when arriving at Born Free 3, look for me and my buddy Craze from Eternal Combustion. We'll be the cats with beers to share and stories to tell about the 3 bikes we're bringing in. So stop by and introduce yourself and enjoy this magical day although the wizards and dragons won't be there unless under a couple coats of aging clear.
2 Days for Born Free.....
Here's a slideshow from last year and a video I shot of the after party at Alex's Bar. Beautiful Buzzards playing...
Tuesday, June 21, 2011
Rear wheel real deal
Yup, that's a Moto Guzzi rear shaft drive wheel with drum brake, so why convert over to sprocket for a '47 Knuckle? If I have to answer that question, you just don't get why we do the things we do. First off the hubcap and cutting a 4" hole for the outside sprocket spacer to hold via a machined flange on the underside. Next, the inner spacer that holds hub to splined drive hub. And finally the sprocket spacer which will accept a custom 50 tooth 7075 Aluminum sprocket made to order.
Monday, June 20, 2011
Friday, June 17, 2011
Thursday, June 16, 2011
Super DerBee
...so in the never-ending quest for total awesomeness, my buddy Craze hands me this NOS Superior derby cover and makes a small request: make him a badass air cleaner for his Super B. Oh and add this and that and what not?!?!?! So here it is all worked out and ready to gently rub against his right leg like a faithful dog.
I think we're getting close.............
I think we're getting close.............
Tuesday, June 14, 2011
Holy Moly
I finally tracked my buddy Lou down to get a pic of the AC I made him installed on his shovel. Can U dig it?
Friday, June 10, 2011
Save the Trees
Two jobs from the same dude fell on my lap with the task of putting in an ignition switch in place of the riser holes (using clipons) on a 35mm Narrow Glide. The next one: an old 41mm narrow tree setup that needed the riser holes repositioned to 3-1/2", spacers made, and some sexy curves added to an otherwise square chunk of steel. Those are getting chrome-plated and if you are going to Born-Free....of course you're going....we will be in the Eternal Combustion booth, so stop by and say hello.
Thursday, June 9, 2011
Wednesday, June 8, 2011
Tuesday, June 7, 2011
Go out and make stuff...
If you bothered to notice, I'm redoing some stuff on the KZ, from the bars to the tank to the seat which will move up and down via a fox airshock. Here is the fulcrum bracket positioned on the crosssbar which a pair of levers attach the seat to the shock. Stay tuned for more pics.
Monday, June 6, 2011
Thursday, June 2, 2011
Whiskey Throttle Saloon
Not only beautiful, these Biltwell throttles are the best in these industry and priced right. So order online or if you're in the area, stop by the saloon/headquarters. Well thought-out products are what these guys are all about and I'm proud to have been a part in the development of these twist-the-wrist fun makers. I think I had a little too much whiskey. Check out BILTWELL now.
Wednesday, June 1, 2011
HELL DRAWETH NEAR.....
Don't forget for you folks in Socal or for those of you around the world who will be in town; this will be the place to be June 11th. We will be one of the sponsors so stop by the booth and have a beer or two with us.
Subscribe to:
Posts (Atom)